|
08:30
|
►
Welcome to tandemPV Workshop 2023!
|
OPENING
|
|
|
08:30
|
Welcome to tandemPV Workshop
|
|
09:00
|
►
Multijunction Architectures: Si/PK
|
TUE-1
|
|
|
|
Chair: Stefaan de Wolf, KAUST | Ulrich Paetzold, Karlsruhe Institute of Technology
|
|
09:00
|
Pathways to efficient perovskite/silicon tandem solar cells
Stefaan De Wolf,
KAUST
|
|
09:20
|
Fully Textured Perovskite/Silicon Monolithic Tandems Certified at 31.25%
Xin-Yu CHIN,
CSEM
|
|
09:40
|
Efficient Perovskite/Silicon Tandem Solar Cells by Solution Processing
Christian Wolff,
EPFL
|
|
10:00
|
Customizing Co-Evaporated Perovskites for Optoelectronic Devices
Annalisa Bruno,
Energy Research Institute @ NTU
|
|
10:20
|
PI Treatment for Triple Halide Perovskite to Achieve 32.5% Efficient Perovskite/Silicon Tandem Solar Cells
Eike Köhnen,
Helmholtz-Zentrum Berlin
|
|
10:40
|
Coffee Break
|
|
11:10
|
►
Multijunction Architectures: Alternative to Si/PK
|
TUE-2
|
|
|
|
Chair: Lars Korte, Helmholtz-Zentrum Berlin |
Monica Morales Masis, University of Twente
|
|
11:10
|
Multi-Junction Solar Cells with 3, 4 and 5 Junctions - Challenges and Solutions
Wolfgang Guter,
AZUR SPACE Solar Power GmbH
|
|
11:30
|
The road to monolithic CIGS/Perovskite tandem: how CIGS surface morphology affects the top cell
Gizem Birant,
imec
|
|
11:50
|
Design and Optimization of Perovskite/CIGS Tandem Solar Cells
Philip Schulz,
IPVF CNRS
|
|
12:10
|
Implementation of high efficiency semi-transparent perovskite solar cells in 2T and 4T tandem solar cells with CI(G)S
Tina Wahl,
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg
|
|
12:30
|
Q&A
|
|
12:40
|
Lunch Break
|
|
13:30
|
►
FOM Workshop
|
SIDE EVENT
|
Foyer - FOM Booth
|
|
|
13:30-15:00, Registration Oniste Only
|
|
13:40
|
►
Poster Session 1 with Coffee Break
|
TUE-POSTER
|
|
|
Tue - A - 01
|
Loss Analysis and Optimization of All-Perovskite Tandem Solar Cells and Modules
Urs Aeberhard,
Fluxim
|
|
Tue - A - 03
|
Consequences of Ion Migration for Spectrometric Characterization of Perovskite Silicon Tandem Solar Cells
Alexander J. Bett,
Fraunhofer ISE
|
|
Tue - A - 05
|
Simulation-Based Optimization of Two-Terminal Perovskite/CIGS Tandem Solar Cells
Aleksandra Bojar,
IPVF CNRS
|
|
Tue - A - 07
|
Injection-dependent Carrier Lifetime Measurement of Metal Halogenide Perovskites using the QSSPC Method
Benjamin Grimm,
Institute for Solar Energy Research Hamelin (ISFH)
|
|
Tue - A - 09
|
TCAD Investigations on the Tunneling Mechanisms and the Impact of Doping at the TCO/HTL Interface of Perovskite/Silicon Tandem Solar Cells
Jonas Kern,
TU Bergakademie Freiberg, Faculty of Chemistry and Physics, Institute of Applied Physics
|
|
Tue - A - 11
|
Modified Electronic Properties at the Perovskite/C60 Interface upon Piperazinium Iodide Treatment – a Near-UV Photoemission Spectroscopy Study
Dorothee Menzel,
Helmholtz-Zentrum Berlin
|
|
Tue - A - 13
|
Influence Of Active Layer Thickness and Interface Defect Density on the Device Characteristics Parameters of 2D/3D MAPbIxBr3−x perovskite Solar Cells
Sajjad Rajabi-Ghaleh,
University of Tabriz
|
|
Tue - A - 15
|
Electroluminescence Imaging of Defects and Time Resolved Degradation in Perovskite Solar Cells
Verena Steckenreiter,
ISFH
|
|
Tue - A - 17
|
Module Performance Comparison between Different Tandem Terminal Circuit Configurations
Karl Wienands,
ISC Konstanz e.V.
|
|
Tue - B - 02
|
Study of Hole Transport Layer Interfaces with Tin Lead Perovskite Absorber for All Perovskite Tandem Solar Cell Applications
Jules Allegre,
CEA INES
|
|
Tue - B - 04
|
Modelling Resistance and Power Losses in Recombination Junction for Perovskite-Based Tandem Solar Cells
Nisheka Anadkat,
Indian Institute of Science Bangalore
|
|
Tue - B - 06
|
Strategies for Reducing ITO Sputtering-Induced Damage in Perovskite/Si Tandem Solar Cells
Aditya Chaudhary,
Institut für Photovoltaik (ipv)
|
|
Tue - B - 08
|
Optimization of Poly-Si/SiOx Passivated Contacts for Perovskites/Crystalline Silicon Tandem Device Integration
Julci Ditsougou,
Univ. Grenoble Alpes, CEA LITEN
|
|
Tue - B - 11
|
Modulating the crystallization to achieve blade-coated Pb-Sn perovskite solar cells with an efficiency approaching 18%
Johnpaul Kurisinkal Pious,
Empa-Swiss Federal Laboratories for Materials Science and Technology
|
|
Tue - B - 13
|
Amphiphilic Conjugated Polyelectrolyte in Self-Assembled Monolayer-Based Perovskite Solar Cells
Thomas Macdonald,
Queen Mary University of London
|
|
Tue - B - 15
|
Mixed Monolayers for the Better Wettability by Perovskite Precursor Solution
Artiom Magomedov,
Kaunas University of Technology
|
|
Tue - B - 17
|
Fully Inorganic CsPbI3 towards Tandem Application
Elisa Nonni,
C.H.O.S.E., Electronic Engineering Department, University of Rome "Tor Vergata"
|
|
Tue - B - 19
|
Thick and Efficient Perovskite Solar Cells Enabled by Fast Co-Evaporation
Manuel Piot,
Instituto de Ciencia Molecular (ICMol)
|
|
Tue - B - 21
|
Chlorine Incorporation for Scalable 1.8 eV Wide Bandgap Perovskite Solar Modules with Enhanced Efficiency and Photostability
Severin Siegrist,
Empa
|
|
Tue - B - 23
|
Two-terminal Perovskite / Silicon Tandem Solar cells with a tuned p-doped Nanocrystalline Silicon layer for the Recombination Junction
Pia Vasquez,
INES
|
|
Tue - B - 25
|
Opto-Electronic Analysis of Phosphorous-Doped Nanocrystalline Silicon Oxide Layers for Perovskite–Silicon Tandem Solar Cells
Philipp Wagner,
Helmholtz-Zentrum Berlin für Materialien und Energie
|
|
Tue - B - 27
|
4-terminal Perovskite/Bifacial Si solar cell with an efficiency of 30.61%
Amir Zarean Afshord,
METU
|
|
Tue - B - 29
|
Inorganic Perovskite Solar Cells: Towards High Efficiency Perovskite On Silicon Tandems
Jiahuan Zhang,
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
|
|
Tue - C - 02
|
Light and Heat-Induced Degradation Pathways in Perovskite Solar Cells
Marion Dussouillez,
CSEM
|
|
Tue - C - 05
|
Upscaling, Metallization and Interconnection of 2-Terminal Tandem Mini-Modules
Devika Rajagopal,
imec
|
|
Tue - C - 07
|
SnO2 Buffer Layer Coating in Production with Levitrack Spatial ALD on M6 Perovskite Tandem Solar Cells
Mark Steltenpool,
Levitech BV.
|
|
Tue - E - 02
|
Compositional and Additive Engineering Towards High Open-Circuit Voltage (∼ 1.27V) Inverted Perovskite Solar Cells and (> 1.975V) Perovskite/c-Si Tandems
Kerem Artuk,
EPFL-PVlab
|
|
Tue - E - 04
|
Perovskite-Silicon Tandem on N-type PolySi Emitter as Enabler for PERC-based Tandem Cells
Bart Geerligs,
TNO Solar Energy
|
|
Tue - E - 07
|
Ag-alloyed CuInSe2 Bottom Cell improvements for 2-terminal
Maximilian Krause,
Empa
|
|
Tue - E - 09
|
Alternative Silicon-Based Recombination Junctions for Perovskite on Silicon Tandem Solar Cells
Baptiste Marteau,
CEA INES
|
|
Tue - E - 12
|
Highly Efficient Semitransparent Mini-Modules for 4-Terminal Tandem Integration
Gopinath Paramasivam,
Helmholtz Zentrum Berlin
|
|
Tue - E - 14
|
Monolithic Perovskite/Silicon Tandems Fabricated via Lamination
Julie Roger,
Karlsruhe Institute of Technology
|
|
Tue - E - 16
|
Laser Patterning Strategies for Perovskite-CIGSe Tandem Solar Cells
Nicolas Otto,
HTW - University of Applied Sciences
|
|
Tue - E - 18
|
Advanced Characterization of Three-Terminal Perovskite/Silicon Tandem Solar Cells
Philipp Tockhorn,
Helmholtz-Zentrum Berlin
|
|
Tue - E - 20
|
Optoelectronic Design of High-Efficiency (>30%) Monolithic Perovskite-Si Tandem Solar Cells
Deniz Türkay,
EPFL/PV-LAB
|
|
Tue - E - 22
|
Perovskite/Perovskite (SuPer)Tandem
Sjoerd Veenstra,
TNO-Solliance
|
|
15:40
|
Coffee Break
|
|
16:10
|
►
Perovskites for Tandem Cells: Composition, Passivation Strategies, Additives
|
TUE-3
|
|
|
|
Chair: Eike Köhnen, Helmholtz-Zentrum Berlin | Philip Schulz, IPVF CNRS
|
|
16:10
|
Vapor-Deposition of Halide Perovskites: from a Multi-Compound Single-Source Target to Solar Cells
Tatiana Soto Montero,
University of Twente
|
|
16:30
|
Interfacial Passivation of Perovskite Films for Single Junction and Tandem Photovoltaics
Sarah Gillespie,
AMOLF
|
|
16:50
|
Fully Evaporated Perovskite-Based Tandem Solar cells
Sofia Chozas Barrientos,
Universitat de València - ICMol
|
|
17:10
|
Evaporated Self-Assembled Hole Transport Layers and Translucent Perovskite Photovoltaics
Ulrich Paetzold,
Karlsruhe Institute of Technology
|
|
17:30
|
Q&A
|